How To Use Craft Smart Acrylic Paint?

Have you ever thought of using Craft Smart acrylic paint but do not know what the right steps are? Then you are at the right place. I came across some interesting research facts that will definitely help you.

How to use Craft Smart acrylic paint? Trust me, using Craft Smart acrylic paint is super easy, but you only need to follow some crucial steps. These steps will help you to get a perfect finished project. However, acrylic paint by Craft Smart is applicable on different surfaces and you need to control the paint on them using my tips.

If you continue reading, I hope you will love exploring the facts about Craft Smart acrylic paint and the ways to use them on your desired surface.

How To Use Craft Smart Acrylic Paint?

Is It Easy To Apply Craft Smart Acrylic Paint On Different Surfaces?

Craft Smart acrylic paint is an easy-grade paint that you can use on any desirable surface only if you know a few tips to apply. 

However, if you are working on an acrylic pouring project, then you need to add a mixing medium and make it guilty to pour over the surface. 

Again if you want a color wash on a piece of paper, then you can simply use wet paper and use acrylic on it. But before that, you need to prepare the surface well so that your acrylic can set properly.

How To Use Craft Smart Acrylic Paint: Step By Step Process

I know you might be good at craft work yet feel a bit stressed whenever you want to try acrylic paint by Craft Smart. 

Well, to be honest, the process is not at all hard, but if you skip any of these steps, you will end up with an uneven finish. 

Step 1: Choose The Right Type Of Paint And The Right Color

If you are up for thin paint to make your art, Craft Smart Acrylic Paint is the right choice. Because thin paint is suitable for both the pouring technique or even the water wash technique.

You get to choose colors from a batch of multiple color palettes and they are quite vibrant.

Step 2: Prepare Your Surface Thoroughly

I’ve discovered that a project can be done by proper surface preparation. A project can “break” if a surface is not prepared. Here are the surfaces and some advice:

  • Wood, Metal, And Glass: Use fine-grit sandpaper to smooth it out; remove any shavings. Thoroughly wash it in warm, soapy water. After a warm water rinse, let it air dry. 
  • Canvas And Paper: If the art paper and canvas have been primed, wipe it clean; if not, add two layers of acrylic paint or gesso primer.
  • Plaster And Poster Board: Use a moist towel to clean.
  • Plastic: Clean plastic with soap and water. However, since acrylic paint in bottles or tubes doesn’t adhere to plastic very well, you will need to rough out the surface with sandpaper.
  • Terra Cotta, Ceramic, And Polymer Clay: Dust it off with a moist cloth, then let it air dry.
  • Tin: If it’s particularly unclean, wash it with soap and water first, then wipe it down with a cloth dipped in white vinegar.
  • Fabric: For this surface, you need to apply primer so that the fabric does not absorb the paint entirely.

Step 3: Consider Priming, And Definitely Basecoat Dark Items With White

If you don’t prime, you can wind up covering an item for a much longer time and you might not obtain the paint adhesion or color brightness you want. This is particularly valid if the object is dark. 

For priming, I advise using gesso or a white with a lot of colors, such as Craft Smart White Acrylic. 

If you are opting for Gesso, then you can go for Liquitex BASICS Gesso Surface Prep Medium.

Step 4: Use Good Quality Brushes And Take Care Of Them

I think it is crucial to utilize natural, soft-bristled brushes for applying paint on multiple surfaces. A poor brush will leave brush hairs or display brushstrokes on your project. 

Between jobs, wash your brushes, and let them air-dry on a piece of paper (use your fingers to shape them while they are wet). 

Well-maintained brushes are an excellent investment because they are durable. The same is true for sprayers and rollers. Don’t cut corners, and later, clean them up completely.

I recommend using BOSOBO Paint Brushes. These are really good. Give them a try!

Step 5: Don’t Put Too Much Paint On Your Brush

Only the center to the tip of your brush’s hair should be painted. The entire brush is not loaded up to the metal section.

When you press the brush down, too much paint can cause it to behave strangely and make the paint more difficult to apply. Use a roller or a bigger brush if you need to cover a greater area.

Step 5: Keep Water Nearby So That You Can Add It To Your Brush Frequently

When applied to a palette, acrylic paint dries up quite rapidly. Although not THAT quickly, it is fast enough for the paint to begin drying as you are painting anything.

Although it’s good to dip your brush into the water in a basin and swirl it about in the paint to start it flowing again, don’t thin the paint too much as this may degrade the color.

Step 7: Use A Sealer To Finish

Without a sealer, acrylic paint has a somewhat powdery sensation. You won’t need to apply anything on top if you choose acrylic paints that are Satin or Gloss and have a built-in sealant. However, it can help your project last longer.

So, for sealer, Krylon Clear Coatings Aerosol is a good one. It gives a really good finish to my paintings.

Over To You

In the end, I can say that if you follow my tips, then using Craft Smart acrylic paint on any surface is always possible. Just grab your paint and brush to turn anything around you into a beautiful canvas. 

I hope this article was helpful to you, but if you have any queries, then please let me know in the comment section below. 

Further Readings

Craft Paint 101: My Top Tips for Using Acrylic Paint
How to Use Acrylic Paint: Materials, Methods and More

Similar Posts

Leave a Reply